Table of Contents
Advertisement
Remote Access
Because the Head Office's network is 192.168.1.0/24, the settings
should be as below:
Dial-In Service: Enable
Start IP Address: 192.168.1.200
Branch Office:
Because the Branch Office's network is 192.168.2.0/24, the settings
should be as below:
Dial-In Service: Enable
Start IP Address: 192.168.2.200
4.3.2 Creating a LAN-to-LAN Dialer Profile
After enabling the Dial-in service, you must create a LAN-to-LAN pro-
file for each network. Click "LAN-to-LAN Dialer Profile" on the Setup
Main Menu to enter the setup page.
4-10
Advertisement
Table of Contents
Need help?
Do you have a question about the Vigor2200 Series and is the answer not in the manual?
Questions and answers