Adjustment Of The Safety Latch - AMF SERIES S104-130 Parts And Service Manual

S-104-100
CLAMPING

Adjustment of the Safety Latch

1. Turn the left hand crank. As the machine reaches home position and the clamps disengage, safety latch
A should fit into notch located on clamp tip B. To adjust, loosen screws C and slide bracket E backward
or forward as necessary in order to position safety latch A to fit into notch. Once the adjustment has been
made, re-tighten screws C.
2. A minimum clearance of 0.79 mm (.031") is required between toggle lever and clamp arm tip. To
adjust, loosen screws C and turn eccentric nut D as necessary. Once the adjustment has been made, re-
tighten screws C.
Revised 09/2004
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
1-69
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606