Top Thread Pick-Up - AMF SERIES S104-130 Parts And Service Manual

S-104-100
CORD TRIM ADJUSTMENTS

Top Thread Pick-Up

The thread pick-up hook is activated by the downward movement of the cutting lever. Turn the left hand
crank until the machine has completed a cycle. Observe the thread pick-up hook as it makes its downward
plunge. The amount of travel required is just enough to reach the point of the needle, just passing beyond
the needle thread. To adjust, loosen pivot screw A, and move swing plate B up or down (up allows the
pick-up hook more of a reach; down allows the pick-up hook less of a reach) as necessary. Once the
adjustment has been made, re-tighten screw A
The thread pick up hook should line up with the needle's center line. To adjust, bend the thread pick-up
hook left or right as necessary. Use a pair of long needle nose pliers.
Revised 09/2004
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
1-89
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606