Starting The Machine - AMF SERIES S104-130 Parts And Service Manual

S-104-100
MACHINE OPERATION

Starting the Machine

It is recommended that 20 buttonholes be sewn on a scrap piece of material before sewing on a garment.
Doing this will remove all the oil and grease from the upper and lower tensions.
1. Place sewing work under clamp feet A. Pull hand clamping lever B forward. Clamp feet A will move
down and hold sewing work in place.
2. Turn main power switch C on, and push down on the back of the foot pedal located on the treadle rail
of the table stand. By doing this the power will be turned on and the brake will be released. Push down on
starting lever D, this will start the machine sewing. DO NOT TRY TO HOLD OR MOVE THE SEW-
ING WORK WITH YOUR HANDS. After the machine has stopped, remove the sewing work from
under clamp feet A.
Revised 09/2004
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
1-10
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606