Clamp Foot Position And Needle Entry Point - AMF SERIES S104-130 Parts And Service Manual

S-104-100
CLAMPING

Clamp Foot Position and Needle Entry Point

The clamp feet must be adjusted so the needle is not allowed to strike the clamp foot on the right hand
stroke of the needle bar. To adjust, loosen screw A in mounting base B of clamp arm C. Move the
mounting base of the clamp arm in either direction 1 or 2 (moving the mounting base in direction 1 will
decrease the distance between the needle and the clamp foot; moving it in direction 2 will increase the
distance). Once the adjustment has been made, fasten the mounting base of the clamp arm in place.
Revised 09/2004
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
1-64
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606