Eyeshape Adjustment - AMF SERIES S104-130 Parts And Service Manual

S-104-100

EYESHAPE ADJUSTMENT

1. Looking at the newly created stitch pattern, determine which way nut A should be moved in order for a
correct eye shape to be obtained. Use the examples below as a guide.
2. To adjust for the eye shape, loosen nut A located on the combination lever B. Move nut up or down as
necessary. If the shape of the eye looks like Example 1, move nut down; if the shape of the eye looks like
Example 2, move nut up.
3. Once the adjustment has been made, re-tighten nut B. Cycle the machine to ensure correct stitch pattern
has been obtained. If the correct stitch pattern has not been obtained, repeat the above steps.
NOTE: It is not uncommon to repeat the above steps several times.
Revised 09/2004
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
1-48
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606