S-104-100
RACE ADJUSTMENTS
Race to Side of Bedplate
1. Remove the throat plate, loopers and spreaders.
2. Set the machine in the eye mode, using eye / no-eye shifter A located in the rear of the bedplate.
3. Turn the left hand crank, stopping once to ensure that holes B (located on the head and bedplate) are in
alignment.
4. Locate scribe line C on the rear of the bedplate. Using a straight edge, mark a matching scribe line onto
the head at position D. Slowly continue to turn the left hand crank until the machine has started into the
eye portion of the cycle. Stop turning the left hand crank once scribe lines C and D are in alignment.
Revised 09/2004
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
1-38
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606