Buttonhole Parameters Adjustment - AMF S-100 Parts And Service Manual

S-311

4. BUTTONHOLE PARAMETERS ADJUSTMENT

Buttonhole lenght
(depends on machine type)
Caution!
If E 50 appears on the display, total buttonhole
lenght is exceeded.
Example:
The S311 CT machine is supplied to sew the buttonholes
with flybar and cross bar. The clamp feet are supplied with
the machine, according the required CT variant (16-20;
20-24; 24-28; 28-32), on which is the lenght of cutting L1
marked (example 16 - 20 mm). To trim the lower threads,
the total buttonhole lenght L in this case can not exceed
the lenght stated on display. For example for CT 20.
1-30
D
- MACHINE CONTROLS
Return to main
display
Electroniccaly
Stitches density
adjustable bite
(range 0.5 - 2.0 mm) size (range ± 0.3 mm)
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
Phones: +420 582 309 146 (Service); +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
First and second row of
stitches adjustment
(range ± 1.0 mm)
ª
Buttonhole lenght
without bar
Table feeding in first and
second row of stitches
(range 0 - 100)
Bar Correction
Revised 04/2007