Cutting Space Adjustment - AMF SERIES S104-130 Parts And Service Manual

S-104-100

CUTTING SPACE ADJUSTMENT

Cutting space is the distance between the two rows of stitches. The distance will vary with different types
of materials. The cutting space sets the boundaries for the knife when cutting the buttonhole. The proper
cutting space sets these boundaries without damaging the stitches. An example of cutting space is shown
below.
To adjust, loosen bolt A. Move bolt down for more cutting space; move the bolt up for less cutting space.
Once the adjustment has been made, re-tighten nut A.
NOTE: When the cutting space is changed, the looper
timing will need to be re-checked.
Revised 09/2004
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
1-49
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606