Alarm Rules - Bosch MIC-7504-Z12WR User Manual

MIC IP ultra 7100i │ MIC IP starlight 7100i
3.
7.7

Alarm Rules

An alarm rule can define which input(s) activate which output(s). Basically, an alarm rule
allows you to customize the camera to respond automatically to different alarm inputs.
To configure an alarm rule, specify one input from a physical connection, from a motion
detection trigger, or from a connection to the camera's LIVE page. The physical input
connection can be activated by dry contact devices such as pressure pads, door contacts, and
similar devices.
Next, specify up to two (2) rule outputs, or the camera's response to the input. Outputs
include a physical alarm output, an AUX command, or a preposition scene.
Select the appropriate option in the field Input (a physical alarm connection):
–
–
–
–
Select one of the following output commands for both Output 1 and Output 2 settings:
Note: Not all options are available for all cameras.
–
–
–
–
–
Note for MIC IP cameras only:
Alarm output is available only when the field Application variant in the Application variant,
page 19 is set to [camera name] - IO" (for a camera connected to MIC-ALM-WAS-24)
Click the checkbox Enabled to activate the alarm.
Click Set to save. The camera's system activates the alarm rules.
Bosch Security Systems
When finished, click Set to transmit the scripts to the device. If the transfer was
successful, the message Script successfully parsed. is displayed over the text field. If it
was not successful, an error message is displayed with further information.
Video analytics/MOTION+: If you select this option, then an alarm will begin when IVA or
motion detection is activated.
Connection: If you select this option, then an alarm will begin when an attempt is made
to access the camera's IP address.
Time: If you select this option, then an input field appears to the right. In this field, enter
the time for the activation of the alarm in hours and minutes. (The default value is 00:00.)
Time range: If you select this option, then two input fields appear to the right. In these
fields, enter the time range for the activation of the alarm in hours and minutes. (The
default values are 00:00 and 00:00.)
None: no defined command.
AUX on: defines a standard or custom keyboard ON command.
AUX off: defines a standard or custom keyboard OFF command.
Pre-position: defines a pre-position from shot 1-256. (Note: This option is not available
for the input Time range.)
Alarm output
User Manual
Alarm | en 53
2020-07 | 1.2 |