Maximum Retention Time; Recording Scheduler - Bosch NDE-8503-R User Manual

FLEXIDOME IP starlight 8000i
Alarm stream
Select the stream to be used for alarm recordings:
–
–
–
Check the encoding interval and bit rates from profile: box and select an encoder profile to
set the associated encoding interval for alarm recording.
Check the Export to account box to send standard H.264 or H.265 files to the target whose
address is displayed.
If the target has not yet been defined, click Configure accounts to jump to the Accounts page
where the server information can be entered.
Alarm triggers
Select the alarm type that is to trigger an alarm recording:
–
–
–
Select the Virtual alarm sensors that are to trigger a recording, via RCP+ commands or alarm
scripts, for example.
Configure accounts
Sends you to the Accounts page.
Copy Settings
You can copy the settings from one profile to another with the Copy Settings button. Select
the target profile and click OK.
Default
The default values are restored.
Click Set to apply the changes.
4.5.3

Maximum Retention Time

Recordings are overwritten when the retention time entered here has expired.
4
Once the storage unit is full, the previous recording will be overwritten.
Click Set to apply the changes.
4.5.4

Recording Scheduler

The recording scheduler allows you to link the created recording profiles to the days and
times at which the camera's images are to be recorded. Schedules can be defined for
weekdays and for holidays.
Weekdays
Assign as many time periods (in 15-minute intervals) as needed for any day of the week. Move
the mouse cursor over the table - the time is displayed.
1.
2.
3.
4.
5.
6.
Holidays
Define holidays whose settings will override the settings for the normal weekly schedule.
Bosch Security Systems B.V.
Stream 1
Stream 2
I-frames only
Alarm input
Analysis alarm
Video loss
Enter the required retention time in days for each recording track.
Click the profile to be assigned in the Time periods box.
Click a field in the table and, while holding down the left mouse button, drag the cursor
across all of the fields to be assigned to the selected profile.
Click the No recordings profile in the Time periods box to deselect the intervals.
Click Select All to select all of the intervals to be assigned to the selected profile.
Click Clear All to deselect all of the intervals.
When finished, click Set to save the settings to the device.
User manual
Configuration | en 43
2021-01 | V02 | F.01U.385.211