Performing System Setup and Compensation
Starting System Setup
Starting System Setup
Perform the following procedure if you are using the B1500A as the DC source
monitor.
1. Prepare the following accessories additionally to the system accessories and the
2. If the Start EasyEXPERT window is opened on the system controller, close it
3. Launch Agilent Connection Expert (see Figure 3-1).
Figure 3-1
Agilent Connection Expert
3- 4
system components.
•
Triaxial cable, 2 ea., required if B1542A-024 is not equipped
•
BNC cable, 1 ea.
•
BNC(m)-Triax(f) adapter, floating guard, 1 ea.
•
BNC(m)-(f)-(f) adapter, 1 ea.
•
GNDU-chassis adapter, 1 ea.
first. The system controller is the B1500A for the EasyEXPERT users, or an
external computer for the Desktop EasyEXPERT users.
USB0::2391::1::0001::0::INSTR
VISA interface ID
GPIB0
USB address
Agilent B1542A User's Guide, Edition 4
GPIB address
System Controller