Inspection
Perform the following inspections when the B1542A arrives at your site.
1. Before unpacking any components, inspect all boxes for any sign of damage that
might have occurred during shipment, such as:
•
dents
•
scratches
•
cuts
•
water marks
If you suspect any damage, notify your local Agilent Technologies sales or
service office.
2. When you open the boxes containing the B1542A, check the components
against the contents lists attached to the boxes. See also Table 1-5.
If anything is missing, notify your local Agilent Technologies sales or service
office.
Agilent B1542A User's Guide, Edition 4
Installation
Inspection
2- 3