Making Measurement Path For Drain (For B1542A-024) - Agilent Technologies B1542A User Manual

Figure 2-13
Installation
Hardware Installation

Making Measurement Path for Drain (for B1542A-024)

Connect the following accessories as shown in Figure 2-13. And fix the drain
pulse/dc switch unit to the appropriate place. Use a torque wrench and an open-end
wrench to fasten the SMA connectors.
Required accessories:
• BNC(m)-SMA(f) adapter, precision type, 1 ea., for oscilloscope
• SMA cable, 0.3 m, 1 ea.
• BNC(m)-Triax(f) adapter, floating guard, 1 ea.
• Triaxial cable, 2 ea.
Measurement Path for Drain
DC source monitor
to SMU Force
for drain voltage
at DC test
Triaxial cables
SMU
Drain Bias Input
2- 16
to SMU
BNC(m)-SMA(f)
Force
adapter precision type
for drain
DC bias
BNC(m)-Triax(f)
adapter (floating guard)
Drain Current Monitor
Drain pulse/dc switch unit
Agilent B1542A User's Guide, Edition 4
Scope
to input channel
for drain
SMA cable, 0.3 m