Table of Contents
Advertisement
Installation
Rack-mounting Pulse/dc Switch Units
Rack-mounting Pulse/dc Switch Units
Rack-mount pulse/dc switch units as shown below. The required parts are included
in the option B1542A-025. See Figure 2-20.
Required parts:
Reference
Agilent Part No.
Designator
A
B1542-00201
B
B1542-01211
C
B1542-01212
0515-0372
-
Procedure:
1. Assemble the rail kits B and C as shown in Figure 2-19. Then make sure and use
the screw hole available for your system rack.
2. Secure the rail assemblies B and C to the proper position of the system rack by
using the typical rack-mounting method of the support rail kit.
3. Assemble the pulse/dc switch unit panel by mounting the following units on the
panel A. Use screws listed above to fix the units.
Reference
Designator
D
E
F
4. Align the pulse/dc switch unit panel (A with D, E, and F) with the rail
assemblies secured to the system rack in the step 2, gently slide the panel on the
rails until it stops, and secure the panel to the system rack by using the typical
rack-mounting method of the rack-mount flange kit.
2- 26
Quantity
1
1
1
12
Agilent Part No.
B1542-60001
Switch control distributor
B1542-60002
Drain pulse/dc switch unit
B1542-60003
Gate pulse/dc switch unit
Agilent B1542A User's Guide, Edition 4
Description
Panel
Rail kit
Rail kit
Screw
Description
Advertisement
Table of Contents
