Performing System Setup and Compensation
Compensation
Compensation
Perform this action after completing system installation or changing a channel
assignment or after replacement, repair, or calibration of oscilloscope.
Figure 3-5
Oscilloscope Compensation Factor Measurement Setup
1. Open the PLSDIV Setup test setup from your preset group.
2. Set the Action field to Compensation.
3. Click the Single button at the upper right corner of the EasyEXPERT/Desktop
EasyEXPERT screen. Connection diagram window is displayed. See Figure 3-5.
Agilent B1542A User's Guide, Edition 4
3- 11