Command Reference - Agilent Technologies B1542A User Manual

NOTE
NOTE

Command Reference

This section contains detailed descriptions of all the Plsdiv commands. The
commands are listed in alphabetical order. Each entry:
1. Gives one command
2. Describes the execution conditions, if any exists
3. Describes the file name to be entered in the Command Filename field
4. Describes the Write Type and Read Type settings that must be set when using
the command
5. Describes the argument to be input in the Argument field, if it exists
6. Lists the input parameters (Write String or Write List) that must be sent to the
command, if any exists
7. Lists the output parameters (Read String, Read Value, or Read List) returned by
the command, if any exists
8. Describes the response (execution result) returned by the command and can be
read by using the Result field of the Read String/Value/List area, if it exists
9. Explains any additional information
The Plsdiv commands are stored in the following folder.
C:\Program Files\Agilent\PLSDIV\PLSDIVExe\TISExe
The Plsdiv commands can be defined in the Windows Command Execution
component on the Test Definition window's Test Contents tab screen.
Most of the Plsdiv commands need parameters to be sent or to be returned. The
parameters will be variables that can be defined in the Test Specification tab screen
or the Local Variable Definition component on the Test Contents tab screen.
Agilent B1542A User's Guide, Edition 4
PLSDIV TIS Commands
Setup Example
6- 9