Plsdivcutoffvd; Plsdivcutoffvg; Plsdiverrormessage - Agilent Technologies B1542A User Manual

Filename
Response
Filename
Response
Filename
Write Type
Read Type
Write String
Read String
Response

PlsdivCutoffVd

This command applies 0 V drain voltage and sets the SMU output switch off.
PlsdivCutoffVd.exe
Status code. Numeric value. To read error message, use PlsdivErrorMessage. If no
error is detected by this command execution, 0 is returned.

PlsdivCutoffVg

This command sets the PGU output switch off.
PlsdivCutoffVg.exe
Status code. Numeric value. To read the error message, use PlsdivErrorMessage. If
no error is detected by this command execution, 0 is returned.

PlsdivErrorMessage

This command returns the error number and error message for the specified status
code. For the error code and message, see "Status Code and Error Messages" on
page 7-1.
PlsdivErrMessage.exe
String
String
This command needs the following input parameter.
status_code Status code returned by a command. Numeric value.
This command returns the following output parameter.
message Error message specified by the status_code parameter. The
message is a string up to 256 characters.
Error number specified by the status_code parameter. Numeric value.
Agilent B1542A User's Guide, Edition 4
PLSDIV TIS Commands
PlsdivCutoffVd
6- 13