Installing The Cary Winuv Software - Agilent Technologies Cary 60 User Manual

Installation
NOTE Accessories ordered are not listed here.
Any differences from the original order should be referred immediately to your
Agilent sales office. All contents of the shipping packages should be assembled
together when installation is to be carried out by Agilent service personnel. Do not
discard any packaging components or filler materials.
To unpack the Cary 60 spectrophotometer:
1 Open the packing box.
2 Two people should lift the Cary 60 from the packaging.

Installing the Cary WinUV Software

1 Turn on the computer.
NOTE If the Agilent Cary WinUV icon is already present on the computer desktop, go to
the 'Installing the Hardware' section on Page 22.
2 Insert the Cary WinUV UFD into the computer's USB drive and run
'AgilentCaryWinUVSetup.exe'.
NOTE The installation program should automatically launch. If it does not, navigate to the
UFD and double click on AgilentCaryWinUVSetup.exe.
3 Click Yes if a 'User Account Control dialog appears.
4 Follow the on-screen instructions.
5 Follow the prompts for the 'Device Driver Installation Wizard'. Ensure the
'Always trust software from "Agilent Technologies, Incorporated" box is
checked and select Install.
6 Click Finish when the installation is complete.
Agilent Cary 60 Spectrophotometer User's Guide 21