Installing M90Xa Software; Prerequisites; M90Xa Software Installer - Agilent Technologies X Series Startup Manual

Installing M90XA Software

Following are the pre-requisites and procedure to install the M90XA Software on your computer.
Note:
The M90XA Software must be installed on the same computer that shares the PXI backplane with
the M9391A or M9393A VSAs.

Prerequisites

Agilent IO Libraries and M9391A or M9393A driver must be installed before installing M90XA
Software.
Agilent IO Libraries Suite:
Minimum required VSA hardware drivers:

M90XA Software Installer

Download the installer package from
If you did not request electronic delivery of the M90XA Software, the Installer DVD is included with your
order.
15
X-Series Measurement Applications for Modular Instruments Startup Guide
16.3
M9391A driver: 1.1 or higher version (1.1.300.0)
M9393A driver: 1.0 or higher version (1.0.70.0)
http://www.agilent.com/find/M90XA-SW
or higher version
.