Adding Snmp Traps - Cisco Small Business RV220W Administration Manual

Administering Your Cisco RV220W
Configuring Simple Network Management
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Cisco RV220W Administration Guide

Adding SNMP Traps

The Traps List Table lists IP addresses of SNMP agents to which the router will
send trap messages (notifications) and allows several operations on the SNMP
agents.
To add a new trap:
In the Traps List Table, click Add.
Enter the IP Address of the SNMP manager or trap agent.
Enter the SNMP trap port of the IP address to which the trap messages will be
sent.
Enter the community string to which the agent belongs. Most agents are
configured to listen for traps in the Public community.
Choose the SNMP Version: v1, v2c, or v3.
Click Save.
7
145