Table of Contents
Advertisement
3-10 Basic Console Operations
3-10-14 To Link Compressor Side-Chains so that One Channel
Controls a Second Channel
1
6
1
Press the {ACCESS} button for the controlling
Channel.
2
At the Input Channel & Inserts panel, select
'DYN' in one of the eight windows. Do this using
the { + } and { – } buttons, and then press the large
{ IN } button.
3
At the Free Assign Area & Dynamics section,
select the COMPRESS { IN } . Its {ACCESS} will
be selected automatically, assigning the
Compressor controls to the panel for adjustment.
3-32
Chapter 3 Getting Started
5
3
8
4
7
2
4
On the LCD screen above the dynamics controls,
press the Dynamics softkey to view the parameters
and transfer curve graph.
5
Select SC TO G1 button (sends the side-chain
control signal to side-chain bus 1). Make sure
LOCAL is selected in the lower window.
6
Press {ACCESS} for the second channel.
7
At the Input Channel & Inserts panel, select
'DYN' and its { IN } button in one of the eight
windows.
Advertisement
Table of Contents
