Environmental Specifications
The following specifications identify maximum environmental
characteristics. At no time should the server run under conditions which
violate these specifications.
Table 36: Environmental Specifications
Variable
Temperature
Nonoperating
Operating
Altitude
Humidity
Nonoperating
Operating wet bulb Not to exceed 33 °C (91.4 °F) (with diskette drive or
Shock
Operating
Packaged
Acoustic noise
Electrostatic
discharge (ESD)
AC Input Power
100-120 V
200-240 V
Requirements
Maximum rate of change = 10°C per hour
–40° to 70 °C (–55° to 150 °F)
10° to 35 °C (41° to 95 °F); derated 0.5 °C for every
1000 ft (305 m)
10,000 ft max
95% relative (noncondensing) @ 30°C (86°F)
hard disk drive)
2.0 g, 11 msec, 1/2 sine
Operational after 30-inch free fall (cosmetic damage
might occur)
< 50 dBA w/ two power supplies at 28 °C +/- 2 °C
< 55 dBA w/ three power supplies at 28 °C +/- 2 °C
Tested to 20 kilovolts (kV) per Intel environmental test
specifications; no component damage
100-120 V , 7.6 A, 50/60 Hz
200-240 V , 3.8 A, 50/60 Hz
Specifications
177
Need help?
Do you have a question about the ALR 9200 and is the answer not in the manual?