Environmental Specifications; Electronic Specifications; Memory Map - Gateway E-9525R User Manual

Storage
ACPI

Environmental specifications

The following specifications identify maximum environmental conditions. At no time should the
server run under conditions which violate these specifications.
Variable
Temperature
Humidity
Acoustic noise
Shock
Vibration
Electrostatic
discharge (ESD)
System cooling
requirement in
BTU/Hr

Electronic specifications

Memory map

Address Range (hex)
0 to 07FFFFh
0A0000h to 0BFFFFh
0C0000h and 0DFFFFh
0E0000h to 0FFFFFh
0E0000h to 0EFFFFh
FC000000h to FFFFFFFFh
www.gateway.com
PCIe x8 mezzanine board for SAS HBA and RAID support.
ACPI 2.0b compliance
Supports:
S0
■
S1
■
S5
■
Requirements
Nonoperating: -40° to 158°F (-40° to 70°C)
Operating: 50° to 95°F (10° to 35°C) with a maximum rate of change not
to exceed 10° per hour
Nonoperating: + 10% to +95%
Operating: +20% to +80%
Sound Pressure: 58 dBA (Rackmount) in an idle state at typical office
ambient temperature. (73.4 +/- ° F) Sound Power: 6.8 BA in an idle state
at typical office ambient temperature. (73.4 +/- 3.6° F)
Operating - 5.0 g, 11 mSec, 1/2 sine
Unpackaged - 25 g, velocity change 136 inches/sec
( ≧ 40 lbs to > 80 lbs).
Packaged - Non-palletized free fall in height 24 inches ( ≧ 40 lbs to > 80 lbs)
Unpackaged - 5 Hz to 500 Hz, 2.20 g RMS random
+/-15 kV, air discharge
+/- 8 kV, direct contact
2380 BTU/hour (Based on one 700W power supply
Amount
640 KB
128 KB
128 KB
128 KB
2 MB
64 MB
Function
DOS region, base system memory
Video or SMM memory
Expansion card BIOS and buffer area
System BIOS
Extended system BIOS
PCI memory space
87