Dialing By Pressing The Delayed Send Key - Pitney Bowes 9930 Operator's Manual

4.4.5 Dialing by Pressing the DELAYED SEND Key (Quick AutoDial)
The Model 9930 has a DELAYED SEND Key for setting up delayed or immediate;
single or multiple transmission jobs. On the Model 9930, up to 30 jobs can be
entered through the DELAYED SEND Key. You can program delayed jobs by any
one of the following methods:
• random phone number entered by touching Numeric Keypad Keys
• previously stored Speed Dial number from Numeric Keypad
• press previously programmed One Touch Key
To program a job using the DELAYED SEND Key:
Do This
1. Insert the document face down in the Automatic
Document Feeder.
2. Press the DELAYED SEND Key.
3. Enter a destination by either entering a phone number
from the Numeric Keypad or entering a previously
stored Speed Dial number; or pressing a previously
programmed One Touch Key.
If a mistake is made, press NO to backspace and erase
incorrect digits or use the Cursor Keys to move the
cursor to the incorrect digit and simply enter the
correct digit.
4. Press YES (press YES a second time if you entered a
Speed Dial destination).
5. Press YES and enter another number. Repeat until all
destinations are entered. Press NO to go on.
This Happens
MODE/NORMAL
ORIGINAL/NORMAL
ENTER DESTINATION #
ENTER DESTINATION
01:MARKETING
ANOTHER NUMBER?
33
ENTER TIME
_ _:_ _