Effective Printing Area; Copying A Document - Pitney Bowes 9930 Operator's Manual

3.8.7 Effective Printing Area

The Model 9930, like all plain paper imaging products (copiers, laser printers,
laser fax units, and ink jet printers), contains certain borders or print margins
where no printing can occur. The Effective Printing Area is therefore somewhat
smaller than the actual size of the Recording Paper loaded in the Model 9930.
There are some special applications which may require setting the Reduction
Ratio to a lower amount than 100%. In the event you notice that your machine is
consistently losing information along the page edges because of the above
margin requirements and Effective Printing Area, the Reduction Ratio can be
changed from 100% to some lower percentage. Please consult your local service
representative or call the Diagnostic Center (refer to Section 8.8).

3.8.8 Copying a Document

You can use the Model 9930 to make convenience copies of a document. You
should also make a copy of a document that is of questionable quality to verify
what the reception quality will be before you send it.
To copy a document:
Do This
Happens
1. Insert the document face down in the Document
Feeder.
2. Press COPY
NOTES:
1. If you wish to make a single copy, you can just press YES or COPY a second
time during Step #3 above instead of entering 1 on the Numeric Keypad. If you
follow this procedure, the document will not be sent to memory first.
2. If you are making several copies of a multi-page document, the display will
inform you of the copying status. The page being printed and the document
number being copied will be displayed.
3. Making multiple copies is dependent upon available memory.
MODE/NORMAL
ORIGINAL/NORMAL
HOW MANY COPIES?
MAX (99) __ __
PAGE.1
25
T h i s
COPY