Display Messages - Pitney Bowes 9930 Operator's Manual

8.2 Display Messages

Display Message
JOB #XX
CANNOT EDIT
COMMUNICATIONS
ERROR
DIALER FULL
ENTER ACCESS CODE
__ __ __ __
ENTER PBX CODE
INCOMPLETE
JOB
CHECK MEMORY
MANAGER
LOWER CASSETTE
EMPTY
2ND CASSETTE EMPTY
Meaning and Solution
You have attempted to edit a programmed job which the
Model 9930 is in the process of performing. If you want to
edit a job (add pages, add dest#, delete, repeat or change
time), you must first press PAUSE and wait for the display
to read PAUSED. The job can be edited during this
interruption.
An unsuccessful transmission
unspecified telephone problem.
again. Or press STOP, contact the remote operator, and
try the transmission once again or repeat the job via the
Edit Job Key or Function # 4 (See Section 5.4).
The AutoDial Memory
programmable AutoDial jobs, or Delayed Send jobs until
an existing job has been completed or deleted. The 9930
can store a maximum of 30 jobs.
The Secure Access feature is ON. You must enter the
Access Code to perform any machine function. See your
Key Operator or System Administrator for assistance.
The PBX Access Code feature is ON. You must enter a
valid PBX Access Code if dialing through your PBX. See
your Key Operator or System Administrator for
assistance.
This message is displayed if no connection was made
after all redial attempts. The unit should have also printed
an Incomplete Dial Message.
Memory Management Report if necessary (see Section
5.6.2). Repeat the transmission or contact the remote
operator to resolve the situation.
If only one additional cassette has been added, this
message will appear.
This message indicates that one of the two additional
cassettes (middle cassette) is empty.
135
resulted from
Press STOP and try
cannot accept any more
Press STOP and print a
an