Safety And Ozone Emission Information; Safety Information; Laser Safety; Cdrh Regulations - Pitney Bowes 9930 Operator's Manual

Equipment Type
Collation Stack: Print
Scan
FCC Registration Number
Ringer Equivalence
8.10 Safety And Ozone Emissions Information
The information contained in the following Section is presented to insure that you
are familiar with all Model 9930 operational aspects and safety issues. General
laser safety information and ozone emission facts are reviewed for you.

8.10.1 Safety Information

The Model 9930 is UL listed, CSA certified, and GS licensed.

1. Laser Safety

The laser component of the Model 9930 is certified as a Class 1 laser product
under the U.S. Department of Health and Human Services (DHHS) Radiation
Performance Standard according to the "Radiation Control for Health and
Safety Act" of 1968. This means that the unit is completely confined within
protective housings and external covers, the laser beam cannot escape from
the machine during any phase of user operation.

2. CDRH Regulations

The Center of Device and Radiological Health (CDRH) of the U.S. Food and
Drug Administration implemented regulations for laser products on August 2,
1976. These regulations apply to laser products manufactured from August 1,
1976. Compliance is mandatory for products marketed in the United States.
This unit complied with DHHS Rules 21 CFR Chapter 1, Subchapter J. at the
date of manufacture.
CAUTION: Use of controls and adjustments of performance of procedures
other than those specified in this manual may result in hazardous
radiation exposure.
Desktop facsimile transceiver
Face Up
Face Down
CHSJPN-22451-FA-E
0.2 B
152