Print Document; Programming P-Keys (One Touch Programmable Keys) - Pitney Bowes 9930 Operator's Manual

5.4.6 Print Document (Only if Delayed Send Documents Are Still in Memory)
Do This
6. Continuing from Section 5.4, Step #5, press 6 and then
press YES.
7. Enter the job number you want printed. Press YES.
Note: Documents are still retained in memory after
printing.
5.5 Programming P-Keys (One-Touch Programmable
Keys Function #7)
On the Model 9930, the last five numbers (P1 to P5) are dedicated as P-Keys.
Once programmed, you can enter the job by pressing the One Touch Program
Key.
If you were to use an AutoDial Job instead of a programmed P-Key, once an
AutoDial Job has been completed it does not exist in memory any longer. A new
job would have to be entered the next time you wish to communicate with the
same locations. Using a One-Touch Program Key saves you the time of entering
the AutoDial Job each time you need to transmit to the same locations.
Programmable One Touch Keys can be reprogrammed with new sets of jobs any
time.
This Happens
ENTER JOB #__ __
JOB #001 PRINTING
PAGE .1/20
JAN 15 1998 10:00
81
OR
SYSTEM READY