Polycom DOC2709A Hardware Manual page 20

RealPresence Collaboration Server (RMX) 4000 Hardware Guide
2
•
•
3
1-12
Position the Rack Spacer (item no. 3) onto the marked rack post together with left rack
rail runner (item no. 1 which is labeled LEFT) and fasten the flat head screws 3*10mm
(item no. 4) as shown in Figure 1-3.
RMX 4000 rack assembly view
without rail runner clip
Figure 1-3 Detail of Front Rack Spacer Assembly (left rail runner is shown here) for all RMX
types
On the RMX1500/4000 the center hole on the Rack Spacer must be left clear as it is required for
fixing the RMX to the rack post. See Figure 1-3.
On the RMX 2000 the top hole on the Rack Spacer must be left clear as it is required for fixing
the RMX to the rack post. See Figure 1-3.
Adjust the telescopic rack rail runner to the rack opening and mount it onto the marked
position of the rear post as described in step 2.
Figure 1-4 Detail of Rear RMX 1500/2000/4000 Rack Spacer Assembly
RMX 4000 rack assembly view
with rail runner clip
Polycom, Inc.