Realpresence Collaboration Server (Rmx) 4000 Rear Panel Leds; Rtm-Ip 4000 - Polycom DOC2709A Hardware Manual

Table 1-12
Component
CNTL 4000 Unit
(continued)

RealPresence Collaboration Server (RMX) 4000 Rear Panel LEDs

RTM-IP 4000

The following LEDs appear on the RTM-IP 4000 card:
Table 1-13
Component
LAN 1 LEDs
LAN 2-5 LEDs
LAN 6 LEDs
10/100Mb
ShMG
INT LEDs
(No.) 1-6
STANDBY LED
Polycom, Inc.
RMX 4000 Front Panel LED's (Continued)
LED ID
HS
RTM-IP 4000 LEDs
LED
LED Color
Name
LNK Green
1Gb Green
LNK Amber
ACT Green
LNK Amber
100 Green
LINK Green
T/R Amber
Green
LED Color Description
Blue Flashes - Indicates when the power down
process is initiated on an MPM+/MPMx card.
This LED flashes in synchronization with the
MPM+/MPMx's cards HS LED.
OFF - Normal
ON - CPU may be removed.
Description
ON with an active network connection, flickers with
Packet activity.
ON with a 1Gb online connection, flickers with
Packet activity.
ON with a 100Mb online connection.
ON with network connection, flickers with Packet
activity.
OFF-1Gb or no connection.
ON - online connection, flickers with Packet activity.
OFF - No Link.
ON - Connection 100Mb.
OFF - Connection is not 100Mb or No Link.
ON with an active network connection, flickers with
Packet activity.
ON with a 1Gb online connection, flickers with
Packet activity.
When the user in the RMX Manager/Client presses
the System Shut Down (red) button in the Hardware
Monitor tool bar, the system should enter a standby
mode and the LED turns ON. Only the media and
control unit cards are in a standby mode. Shelf
Manager remains active.
Turn the system OFF/ON to exit the standby mode.
Chapter 1-Hardware Description
1-31