Printing From The Xerox Ex Print Server, Powered By Efi To The Perfect Binder; Binder Manual Mode With The Ex Print Server; Printing/Binding With Preprinted Covers To The Ex Print Server - Xerox Color 800 User Manual

Printing from the Xerox EX Print Server, Powered by EFI to the
Perfect Binder
The following procedures provide instructions on different types of binder print jobs sent
from the print server to the binder. Carefully read and perform the steps to successfully
print your job.

Binder manual mode with the EX Print Server

This procedure describes how to use the binder's manual mode for both covers and book
blocks to create a finished book. Both covers and the book block (book pages) are
preprinted prior to using the binder's manual mode.
1. Preprint covers and book block (pages) separately and place them within reach of
the Perfect Binder.
2. Load the preprinted covers into the binder's cover inserter tray. Adjust the paper
guides to gently touch the edges of the paper.
3. At the system's UI, confirm/change the tray properties for the preprinted covers.
Tray appears on the system's UI as T1.
4. At the print server, place the binder in manual mode.
5. At the binder, open the compiler tray cover.
6. Lift Handles 1 and 2 to gain access to the book block area.
7. Insert the book block (printed pages of the book) into the area in the LEF and face
down direction.
8. Move the green lever to adjust the paper guides to the edge of the paper.
9. Close Handles 2 and 1.
10. Close the compiler tray cover.
11. Press the green Start button on the binder's control panel.
The book is now bound and/or trimmed.
12. Push the green button to open the book stacker tray and to retrieve the book.
13. Go to the print server.
14. At the print server, disable the binder's manual mode and place it back online with
the system.

Printing/binding with preprinted covers to the EX Print Server

This procedure uses covers that are preprinted on large stock, such 11 x 17 in./A3, and
loaded into the binder's cover inserter tray. A single file containing the book block is
printed and sent to the binder. At the binder the covers are automatically fed and bound
to the book block producing a finished book.
1. Load the preprinted covers into the binder's cover inserter tray. Adjust the paper
guides to gently touch the edges of the paper.
®
Xerox Color 800/1000 Press
User Guide
Perfect Binder
16-21