Tips For Using Advanced Stock Setup Options - Xerox Color 800 User Manual

- 2nd Bias Transfer Roll
- Fuser Temperature
• Folder Adjustment Profile
Each of these options is discussed throughout the remainder of this section, and where
required, step-by-step procedures also are provided.
Important
Paper Curl Correction options and the ability to run test prints are available ONLY when
logged in as Administrator. Refer to the System Administrator Guide for detailed
information.
Related Topics:
Stock By Name Only
Multifeed Detection
Near Empty Detection Level
Tray Air Assist
Enable Tray Heater
Aligner Roll Pressure
Second (2nd) bias transfer roll
Fuser Temperature
Fold Adjustment Profile
Create/modify Advanced Stock Setup options

Tips for using Advanced Stock Setup options

Before using any of the Advanced Stock Setup options, keep the following information
in mind:
• It is recommended that you choose only one option at a time. This helps you
determine whether or not that option is providing the desired printed output.
Important
It is HIGHLY recommended that you run test prints after selecting each Advanced
Stock option. This allows you to evaluate the printed output and determine if it is
acceptable or not. In order to run test prints, you MUST be logged on as Administrator.
• If you determine that the output is unacceptable, either further adjust the value for
a particular option (if applicable) or return the option to its default value and continue
to the next option.
• It is important to remember that any settings for a particular option that is used
today for a specific print job may not achieve the same desired outcome/output
when used on different day for that same print job. This is especially relevant if the
room in which the machine is located experiences changes in temperature and
humidity.
®
Xerox Color 800/1000 Press
User Guide
Advanced Stock Setup
8-3