Configuring A Netware 3.X, 4.X Or 5.X Server For Printing - Xerox 2006NPC - DocuColor Color Laser Manual

Docucolor 2006 network server setup
Hide thumbs Also See for 2006NPC - DocuColor Color Laser:
Table of Contents

Advertisement

8. Setting up the network server
You do not have to rerun Setup when adding or removing a NetWare
queue, but you should initialize these settings by powering the printer
off and on after a queue is created or removed.
When the DocuColor 2006 is configured to connect to a NetWare
server, it polls the NetWare server for jobs in each of its queues. If jobs
are found, they are transferred over the network to the matching
connection. For example, jobs from the NetWare queue with the _print
extension are sent to the Print queue. While a job is processed and
printed, a record of the job is created. You can access the Job Log
containing these records at any time.

Configuring a NetWare 3.x, 4.x or 5.x server for printing

Use this section when you set up a NetWare file server so that
networked users can print to the DocuColor 2006 from their
workstations and the printer can obtain jobs from the NetWare server.
For each NetWare file server that you configure, follow these general
steps:
Ensure that the server is connected to a functioning IPX network.
Log in as the Supervisor from a PC connected to the NetWare file
server.
For NetWare 4.x and 5.x installations, set up an NDS connection.
For NetWare 4.x and 5.x in emulation mode, set the bindery
context.
For NetWare 3.x and for NetWare 4.x and 5.x in bindery
emulation, set up a file server, a print server, and a print queue
for the DocuColor 2006.
More detail is provided in subsequent sections and in your NetWare
documentation.
With bindery services, you can route all DocuColor 2006 print jobs
through the same NetWare file server, or you can configure more than
one file server to handle DocuColor 2006 jobs.
The functions you perform on the Novell server, on the DocuColor
2006 and on the client workstation, are summarized in the following
tables. Complete the operations on the server first, then at the
DocuColor 2006, and finally at the client workstation.
8–4
Xerox DocuColor 2006

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docucolor 2006

Table of Contents