Folding Feature; Fold Types - Xerox Color 800 User Manual

(continued)
No. Component
4 Staple cartridge
5 Staple waste container
6 Top tray
7 Stacker (middle) tray
8 Right cover
9 C/Z-Fold output tray
(optional)
10 Left cover.

Folding feature

If your machine is equipped with the optional C/Z Folder, you can make prints using the
folding option. The option folds your prints in half (single) or in thirds (C-fold or Z-fold
types). The folding option is selected from the print driver.
Note
In order to use the folding option, the orientation of documents must be short-edge
feed (SEF). You must select a paper tray that contains SEF stock.

Fold types

These fold types are available:
®
Xerox Color 800/1000 Press
User Guide
Function
Contains staples; remove this cartridge to replace staples
and clear staple jams.
Container for staple waste; remove this container when
full.
The Top Tray is used for stacked output, and can receive
up to 500 sheets of 20 lb./80 gsm paper. Copies are
delivered here when specific output features are selected,
such as Automatic sorting, Collated, Uncollated, or
Normal.
The Stacker Tray is used for offset and/or stapled output,
and can hold up to 2000 sheets of 20 lb./80 gsm paper.
This tray also receives copies when you punched and
Z-folded copies.
Note
Both the Top and Stacker Trays can be used for hole
punched output (optional)
Open to clear paper jams, replace staples, clear jammed
staples, or remove the scraps from the puncher.
The optional Folder tray receives copies when you select
C-folding or Z-folding of 8.5 x 11 in./A4 output and 11 x
17 in./A3 media.
Open this cover to access the machine and to clear paper
jams.
Standard Finisher Plus
19-3