Xerox Color 800 User Manual page 144

Problem solving
(continued)
Fault code
092 938
093 310, 093 911, 093 912,
093 913, 093 914, 093 915,
093 916, 093 917, 093 918,
093 919, 093 920, 093 921
093 322
093 400, 093 401, 093 402,
093 403, 093 404, 093 405
093 406, 093 407, 093 408,
093 409, 093 410, 093 411
093 413, 093 414, 093 415,
093 416, 093 417, 093 418
093 910, 093 911, 093 912,
093 913, 093 914, 093 915
093 916, 093 917, 093 918,
093 919, 093 920, 093 921,
093 922, 093 923, 093 924,
093 925, 093 926, 093 927,
093 928, 093 929, 093 930,
093 931, 093 932, 093 933
093 934, 093 935, 093 936,
093 937, 093 938, 093 939
093 940
093 941
094 310
094 311
094 312
10-42
Possible cause
This fault was generated when
the software for cleaning the
Charge Corotron Cleaner did
not function correctly
Dispensing errors
Customer Replaceable Unit
Memory communication
failure
Dry ink/toner fault
Dispenser Replacement timing
fault
Communication failure
between the Customer
Replaceable Unit Memory and
Dry ink/toner Cartridge
Dry ink/toner cartridge faults
The machine continued
printing while the toner/dry ink
door was open
Unable to detect the Image
Belt Transfer Module (IBT)
Image Belt Transfer (IBT) error
Second Bias Transfer Belt does
not make contact or retract
Recommended solution
Power Off/On the machine.
If error persists, contact the
Customer Support Center.
Power Off/On the machine.
If error persists, contact the
Customer Support Center.
Power Off/On the machine.
If error persists, contact the
Customer Support Center.
Replace Dry ink/toner
Cartridge.
Contact the Customer Support
Center.
Reinsert Dry ink/toner
Cartridge.
Power Off/On the machine.
Reinsert Dry ink/toner
Cartridge.
Power Off/On the machine.
Close the Dispense Door.
Power Off/On the machine.
Close the Door.
Power Off/On the machine.
Power Off/On the machine.
If error persists, contact the
Customer Support Center.
Power Off/On the machine.
If error persists, contact the
Customer Support Center.
®
Xerox Color 800/1000 Press
User Guide