Printing/Binding From Two Files To The Cx Print Server - Xerox Color 800 User Manual

The Job Properties window opens.
5. On the Copies and pages screen, enter the number of copies to print and bind.
6. Select Print Method, and select Simplex or Duplex from the menu.
For Duplex, you can select head to head or head to toe layout.
7. Select Paper Stock, and select the parameters for the book body paper.
8. Select Finishing to set parameters for the cover stock.
a) From Output tray, select Perfect Binder Tray.
b) From the Pull Cover From, select the source tray for the cover stock. This will be a
specific tray on the press or the binder's cover inserter tray.
If you intend to print the cover from the file, you must select a tray on the press.
c) From Cover Content, select the desired option.
d) If there is a spine title or image in the file, select From file for the Spine entry;
otherwise, accept the default Blank.
e) From Binding, select the location for the binding: Left, Right, Top, or Bottom.
This is generally Left for most Western countries and sometimes Top for a
calendar-like orientation.
f) Select the Trimming job box, to set trim mode.
g) For Mode, select either Fore Edge or Cut to Size.
9. Select Save after setting the Trim settings.
10. Review the picture of the selected setup.
11. Verify that this is the desired layout.
12. Select Submit to print the job.
13. From the binder, the book stacker tray LED lights indicating that a finished book was
delivered to book stacker tray.
14. Press the button to open the book stacker tray.
15. Remove the book and close the tray.

Printing/binding from two files to the CX Print Server

This procedure uses one file for covers that are preprinted on large stock and loaded
into the binder's cover inserter tray. A second file containing the book block is then
printed at the printer and sent to the binder where the covers are automatically fed and
bound to the book block.
1. Submit the cover file to the Hold queue of the print server.
2. From the print server's Hold queue, open the cover file's Job Properties.
3. On the Copies and pages screen, enter the number of copies to print and bind.
4. Select Print Method, and select Simplex or Duplex from the menu.
®
Xerox Color 800/1000 Press
User Guide
Perfect Binder
16-19