Manual Decurling Feature On The Finisher - Xerox Color 800 User Manual

(continued)
No. Component
10 C/Z-Fold output tray
(optional)
11 Left cover.
12 Post-process inserter (Tray
8/Tray T1)
13 C/Z-Fold output tray
button
14 Manual decurl button

Manual decurling feature on the finisher

The finisher provides a manual decurling feature which allows you to adjust the curl of
the print output at point of need.
Pressing the Decurler button on the finisher switches the decurl feature between the
Auto, On, and Off modes.
®
Xerox Color 800/1000 Press
User Guide
Function
The optional Folder tray receives copies when you select
C-folding or Z-folding of 8.5 x 11 in./A4 output and 11 x 17
in./A3 media.
Open this cover to access the machine and to clear paper
jams.
This is tray is called either Tray 8 or Tray T1. Its name
depends on which machine to which the finisher is attached.
Features for Tray 8/T1 include the following:
• This tray is standard on this finisher and is used to load
paper that will be used as separators and covers.
• Paper loaded here is not printed on; use this tray for
pre-printed stock and for insertion into the printed output.
(This tray is also known as the Interposer).
• Tray 8 holds a maximum of 200 sheets when using 20
lb./75 gsm paper.
• Paper can be loaded in the LEF or SEF direction.
Press this button to open C/Z-Fold output tray.
When you press this button, it activates a decurling feature
for the output material. This applies especially to lighter
weight paper.
Standard/Booklet Maker Finisher
17-3