Printing From The Xerox Cx Print Server, Powered By Creo To The Perfect Binder; Binder Manual Mode With The Cx Print Server - Xerox Color 800 User Manual

If you want more trimmed from the bottom and less trimmed at the top, decrease
the setting. If you want more trimmed from the top and less trimmed at the bottom,
increase the setting. The total trim amount remains the same, but the bound book
is shifted up or down during the cutting process.
19. Select OK to save and close.
20. Select Print.
The job is sent to the printer and binder.
21. From the binder, the book stacker tray LED lights indicating that a finished book was
delivered to book stacker tray.
22. Press the button to open the book stacker tray.
23. Remove the book and close the tray.
Printing from the Xerox CX Print Server, Powered by Creo to the
Perfect Binder
The following procedures provide instructions on different types of binder print jobs sent
from the print server to the binder. Carefully read and perform the steps to successfully
print your job.

Binder manual mode with the CX Print Server

This procedure describes how to use the binder's manual mode for both covers and book
blocks to create a finished book. Both covers and the book block (book pages) are
preprinted prior to using the binder's manual mode.
1. Preprint covers and book block (pages) separately and place them within reach of
the Perfect Binder.
2. Load the preprinted covers into the binder's cover inserter tray. Adjust the paper
guides to gently touch the edges of the paper.
3. At the system's UI, confirm/change the tray properties for the preprinted covers.
Tray appears on the system's UI as T1.
4. From the print server icon bar, select the Activate Perfect Binder icon.
The Printer Status icon on the left of the screen displays Manual_Perfect _Binder.
5. From the Tools drop-down menu, select Manual Perfect Binder tool.
The Manual Perfect Binder window opens.
6. For Job Type, select either Binding or Trimming.
The Binding option binds and trims, while the Trimming option only trims.
If you select Trimming, a window opens to set the trim amount for the fore edge.
7. Select Save to the Trim Settings window.
8. From Trim method, select None, Fore Edge or Cut to Size.
®
Xerox Color 800/1000 Press
User Guide
Perfect Binder
16-17