Printing/Binding From A Single File To The Cx Print Server - Xerox Color 800 User Manual

Industrial printing system
Hide thumbs Also See for Color 800:
Table of Contents

Advertisement

Perfect Binder
9. Select Save after setting the Trim settings.
10. Under Body paremeters, select:
a) The Paper size of the book block.
b) A Paper Type (if different from Plain paper)
c) The Coating (Uncoated, Gloss or Matte)
11. Under Cover parameters, select:
a) The cover Paper size
b) A Paper Type (if different from Plain paper)
c) The Coating (Uncoated, Gloss or Matte)
12. Select Submit.
13. Select OK to the message that parameters have been sent to the binder.
14. Select Close on the Manual Perfect Binder window.
15. At the binder, open the compiler tray cover.
16. Lift Handles 1 and 2 to gain access to the book block area.
17. Insert the book block (printed pages of the book) into the area in the LEF and face
down direction.
18. Move the green lever to adjust the paper guides to the edge of the paper.
19. Close Handles 2 and 1.
20. Close the compiler tray cover.
21. Press the green Start button on the binder's control panel.
The book is now bound and/or trimmed.
22. Push the green button to open the book stacker tray and to retrieve the book.
23. Go to the print server.
24. Select the Perfect Binder icon on the print server icon bar.
The Printer Status now displays Ready, and the binder immediately returns to online
with the printer.

Printing/binding from a single file to the CX Print Server

This procedure uses a single file that contains both the cover and the book block. The
file is submitted to the print server, set to be finished at the Perfect Binder, and then
released for processing and printing.
1. Load the cover stock into one of the printer's trays, and confirm the settings on the
UI.
2. For the book block pages, load the desired stock into one of the printer's trays and
confirm on the settings on the system's UI.
3. Send the job containing both your cover and the book block pages to the print server's
Hold queue.
4. From the print server, select the job in the Hold queue and then select Job Properties.
16-18
®
Xerox
Color 800/1000 Press
User Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents