Configuring A Netware Server For Printing; Configuring An Nds Connection - Xerox DocuColor 4 Administrator's Manual

4.3
The following sections explain how to set up a NetWare file server so that
networked users can print to the DocuColor 4 LP/CP from their worksta-
tions, and the DocuColor 4 LP/CP can obtain print jobs from the NetWare
server.
For each NetWare file server that you configure, follow these general steps.
More detail is provided in subsequent sections.
• Make sure the server is connected to a functioning IPX network.
• Log in from a PC connected to the NetWare file server. With Novell 3.x,
log in as the Supervisor; or with NDS or Novell 4.x, log in as Admin.
• For NetWare 4.x installations, set up an NDS connection (see page 71).
• For NetWare 4.x in emulation mode, set the bindery context (see page
75).
• For NetWare 3.x and for NetWare 4.x in bindery emulation, set up a file
server, a print server, and a print queue for the DocuColor 4 LP/CP (see
page 82).
With bindery services, you can route all DocuColor 4 LP/CP print jobs
through the same NetWare file server, or you can configure more than one
file server to handle DocuColor 4 LP/CP jobs.
The functions you perform on the Novell server, on the DocuColor 4 LP/CP,
and on the client workstation, are summarized in the following tables. The
first table applies to NDS connections, the second to bindery connections.
Complete the operations in the left column, then the center column, then the
right column.
4.3.1

Configuring an NDS connection

Abbreviations:
FS = file server
PS = print server
PQ = print queue (on the NetWare server)
Configuring a NetWare server for
printing
4
69