Power On/Off The Machine; Feeding And Finishing Devices - Xerox Color 800 User Manual

Power on/off the machine

Use the power switch to power ON or power OFF the machine.
• Power on: Press the power switch to the ON position to power on the machine.
A screen message advises of a short wait while the fuser warms up and the machine
runs a system check. You can program the machine for a job during this time and
the printing process will start automatically when the machine is ready.
• Power off: Press the power switch to the OFF position to power off the machine.
Note
Allow the machine to remain off for a minimum of 10 seconds before switching the
power on again.
The Power on/off switch is found on the Print Engine Right Side as shown in the following
illustration. The circled area indicates the location of the power switch.

Feeding and finishing devices

Available with your machine is a variety of optional feeding and finishing devices. These
devices are briefly discussed on the following pages along with where to find specific
information on each device.
®
Xerox Color 800/1000 Press
User Guide
Product overview
1-7