Change Language; Power Saver; Print Server Overview - Xerox Color 800 User Manual

Product overview

Change language

To change the language, use the following procedure.
1. Select the Language button on the UI.
2. Select the desired language button; the language on the UI changes to the new
language and closes the Language window.
3. Select the Cancel button to return to the main UI screen.

Power saver

The machine automatically enters the power saver mode after fifteen minutes of
inactivity. This time may be changed to reflect a value of 1-240 minutes; you must enter
the Administrator mode to change it.
There are two Power Saver modes:
• System PC & Print Engine: Selecting this option places both the machine and the
System PC in power saver mode.
• Print Engine Only: Selecting this option places only the machine in power saver
mode.
The system exits the Power Saver mode when a job is sent to be printed or the UI on
the System PC is activated.
Note
To manually exit Power Saver mode, press the Power Saver button on the System PC.
Refer to the System Administration Guide for more information on this feature.

Print server overview

One of three print servers may be used with your digital press:
®
• Xerox FreeFlow Print Server, for the Xerox
®
• Xerox CX Print Server, Powered by Creo
®
• Xerox EX Print Server, Powered by Fiery
Note
For detailed information on your specific print server, refer to the customer
documentation that was delivered with it.
1-4
®
Color 800/1000 Press
®
®
Xerox
®
Color 800/1000 Press
User Guide