Fault Codes - Xerox Color 800 User Manual

Interface Module
4. Close the front cover of the Interface Module.
5. Follow the instructions on the UI to clear other areas or to resume your print job.

Fault codes

The fault code table lists problems and suggested solutions that apply to the Interface
Module. If the problem persists after following all instructions, call your Xerox Customer
Support Center.
Fault code Possible cause
048-100 Paper jam:
048-101
• A jam occurred during
048-102
feeding.
048-103
• A jam notification is
048-900
displayed on the UI.
048-901
048-903
048-300 The front door is open.
048-310 Decurler sensor or belt problem
048-311
048-312
048-313
048-314
048-315
048-316
048-317 Cooling fan failure
048-318
048-319
14-8
Recommended solution
• Open the front door.
• Carefully remove all sheets and paper
scraps from the jam clearance areas.
• Close the front door. Verify the paper
used is within the approved paper
specifications.
Close the front door.
Power off, then power on.
Power off, then power on.
®
Xerox Color 800/1000 Press
User Guide