Loading Paper/Tabs In Tray 8/T1 (Post-Process Inserter) - Xerox Color 800 User Manual

Z-Fold Half Sheet (shown here with 3-hole punch)
As with a regular Z-Fold, it has two folds that are folded in the opposite directions. The
difference between a regular Z-Fold and a Z-Fold Half Sheet is that the Z-Fold Half
Sheet is not folded in two equal folds. The two folds are unequal which allows one edge
of the Z-Fold Half Sheet to have a longer edge, and the longer edge allows for stapling
or hole punching.

Loading paper/tabs in Tray 8/T1 (Post-Process Inserter)

1. If necessary, remove any remaining media that is currently loaded in Tray 8/T1.
2. Hold the center of the paper guides and slide them to their desired paper size.
3. Load the paper/tabs, aligning it to the front side of the tray.
®
Xerox Color 800/1000 Press
User Guide
Standard Finisher Plus
19-5