Xerox Color 800 User Manual page 320

Standard/Booklet Maker Finisher
(continued)
Fault code
024 979
024 980
024 981
024 982
024 983
024 984
024 985
024 987
024 988
024 989
047 320
112 700
116 790
124 705
124 706
124 709
17-42
Possible cause
The staple cartridge is
empty
The finisher stacker tray is
full
The finisher top tray is full
The finisher stacker tray
lower safety warning in on
The finisher booklet tray is
full
The booklet stapler low
staple F signal is on
The booklet stapler low
staple R signal is on
The booklet folder tray is
full
The booklet folder tray is
full
There is a problem with
the booklet maker stapler
A communication error has
occurred with the Finisher
Punch Waste Container is
full or near full
The settings for stapling
are canceled and prints the
data
The settings for punching
are canceled
The settings for folding are
canceled
The number of pages
exceeds the number of
pages that can be stapled
Recommended solution
Check staples. Follow procedures to
remove and replace staple cartridge.
Remove all paper from the stacker
tray.
Remove all paper from the finisher
top tray.
Remove all paper from the stacker
tray and remove any other
obstructions.
Remove all paper from the booklet
tray.
Remove all paper from the booklet
tray.
Remove all paper from the booklet
tray.
Remove all paper from the tray. Set
the output tray for three fold.
Check that the folder tray is correctly
attached and set.
Check the staple cartridge and reset
correctly.
Power Off/On the machine. If the
error persists, contact the Customer
Support Center.
Remove and empty the waste
container and reinstall.
Confirm the staple psoition and try
to print again.
Confirm the punching position and
try to print again.
Confirm the folding settings and try
to print again.
Decrease the number of pages, or
cancel the stapling settings, then try
to print again.
®
Xerox Color 800/1000 Press
User Guide