Xerox Color 800 User Manual page 81

3. Slowly pull out the paper transport drawer until it stops.
4. Use a damp, water-moistened (not wet), lint-free cloth to clean the paper path only
in the green lever jam clearance areas as shown in the illustration.
a) Open each area and clean the surfaces of the green-handle areas.
b) Remove any residual moisture with a dry, lint-free cloth.
5. Return all the green levers to their original positions.
6. Using a lint-free cloth, clean the belts in Area 3 by rotating them in the direction that
paper travels.
Continue to wipe the belts as you rotate them until all the belts are clean.
Note
Do not rotate the belts with your bare hands as this will leave grease and dirt on them
and may create paper jams. Rotate the belts by using a lint-free cloth.
7. Grasp handle 3 and slowly push in the paper transport drawer until it stops. Turn the
handle in the direction of the arrow to lock the module in place.
®
Xerox Color 800/1000 Press
User Guide
Maintenance
9-5