Power Save Configuration Menu - Cisco 7970G Administration Manual

Device Configuration Menu

Power Save Configuration Menu

Table 4-13 Power Save Configuration Menu Options
Option Description
Display On Time Time each day that the LCD screen
turns on automatically (except on the
days specified in the Days Display Not
Active field).
Display On Length of time that the LCD screen
Duration remains on after turning on at the time
shown in the Display On Time option.
Display Idle Length of time that the phone is idle
Timeout before the display turns off. Applies
only when the display was off as
scheduled and was turned on by an
end-user (by pressing a button on the
phone, touching the touchscreen, or
lifting the handset).
Days Display Not Days that the display does not turn on
Active automatically at the time specified in
the Display On Time option.
Display On When Indicates whether the LCD screen
Incoming Call automatically illuminates when a call is
received.
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
4-32
The Power Save Configuration menu displays the settings that control when the
LCD screen on a phone turns off to conserve power.
options on this menu.
For detailed information about configuring these settings, see the
Disabling the Cisco Unified IP Phone Touchscreen" section on page
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
Use Cisco Unified CallManager
Administration > Device > Phone >
Phone Configuration.
Use Cisco Unified CallManager
Administration > Device > Phone >
Phone Configuration.
Use Cisco Unified CallManager
Administration > Device > Phone >
Phone Configuration.
Use Cisco Unified CallManager
Administration > Device > Phone >
Phone Configuration.
Use Cisco Unified CallManager
Administration > Device > Phone >
Phone Configuration.
Table 4-13 describes the
"Automatically
6-11.
OL-11524-01