Using Cisco Unified Ip Phones With Different Protocols - Cisco 7970G Administration Manual

Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network
Using Cisco Unified IP Phones with Different
Protocols
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
OL-11524-01
For detailed instructions about using BAT, refer to Cisco Unified CallManager
Administration Guide and to Cisco Unified CallManager Bulk Administration
Guide.
Related Topics
Adding Phones with Auto-Registration, page 2-14
•
Adding Phones with Auto-Registration and TAPS, page 2-15
•
Adding Phones with Cisco Unified CallManager Administration, page 2-16
•
The Cisco Unified IP Phone can operate with SCCP (Skinny Client Control
Protocol) or SIP (Session Initiation Protocol). You can convert a phone that is
using one protocol for use with the other protocol.
This section includes these topics:
Converting a New Phone from SCCP to SIP, page 2-18
•
Converting an In-Use Phone from SCCP to SIP, page 2-18
•
Converting an In-Use Phone from SIP to SCCP, page 2-19
•
Deploying a Phone in an SCCP and SIP Environment, page 2-19
•

Using Cisco Unified IP Phones with Different Protocols

2-17