Power Save Configuration Menu - Cisco 7975G Software Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone

Power Save Configuration Menu

The Power Save Configuration menu displays the settings that control when the LCD screen on a phone
turns off to conserve power.
For detailed information about configuring these settings, see the
Unified IP Phone Touchscreen" section on page
Table 4-14 Power Save Configuration Menu Options
Option
Display On Time
Display On Duration
Display Idle Timeout
Days Display Not
Active
Display On If Incoming
Call
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP and SIP)
OL-15790-01
Table 4-14
Description
Time each day that the LCD screen turns on
automatically (except on the days specified in
the Days Display Not Active field).
Length of time that the LCD screen remains on
after turning on at the time shown in the Display
On Time option.
Length of time that the phone is idle before the
display turns off. Applies only when the display
was off as scheduled and was turned on by an
end-user (by pressing a button on the phone,
touching the touchscreen, or lifting the handset).
Days that the display does not turn on
automatically at the time specified in the Display
On Time option.
Indicates whether the LCD screen automatically
illuminates when a call is received.
describes the options on this menu.
"Automatically Disabling the Cisco
6-7.
To Change
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
Device Configuration Menu
4-23